| 3151/30513151/3051豎管道式差壓密度計實用的對照參數（2） |
| 信息來源： 液位變送器生產 | 2020-10-15 點擊量： 8584 |
3151/3051豎管道式差壓密度計用于各種液體或液態混合物密度在線測量的自動化測量?jī)x表。是一種用于連續在線測量液體密度的現場儀表，可直接用于工業生產過程。智能在線密度計采用先進技術，包括：一個電容式高精度差壓傳感器以及與其相連接的、插入生產過程的一對壓力中繼器。在兩個壓力中繼器之間有個溫度傳感器，用來補償過程液體的溫度變化。3151/3051豎管道式差壓密度計工作時連續在線測量液體密度，無過程中斷?？芍苯佑糜谏a(chǎn)過程的控制；采用一體化的兩線制變送器結構，無活動部件安裝使用方便、維護簡單；配帶清洗裝置，可定期清洗探頭，從而保證使用精度。
3151 / 3051 vertical pipe differential pressure densimeter is an automatic instrument for on-line measurement of density of various liquids or liquid mixtures. It is a field instrument for continuous on-line measurement of liquid density, which can be directly used in industrial production process. The intelligent on-line densitometer adopts advanced technology, including a capacitive high-precision differential pressure sensor and a pair of pressure repeaters connected to it and inserted into the production process. There is a temperature sensor between the two pressure repeaters to compensate for the temperature change of the process liquid. 3151 / 3051 vertical pipeline differential pressure densimeter can measure liquid density continuously and on line without process interruption. It can be directly used for the control of the production process; it adopts the integrated two-wire transmitter structure, no moving parts, easy to install, use and maintain; equipped with cleaning device, the probe can be cleaned regularly to ensure the use accuracy.
決定精度的有，非線性，遲滯性，非重復性，溫度、零點偏置刻度，溫度的影響。但主要由壓力變送器非線性，遲滯性，非重復性，精度越高，價格也就越高。每一種電子式地測量計都會有精度誤差的,但是由于各個國家所標地精度等級是不一樣的,比如,中國和美國等國家標的精度是傳感器在線性度最好的部分,也就是我們通常所說的測量范圍的10%到90%之間的精度;而歐洲標的精度則是線性度最不好的部分,也就是我們通常所說地測量反的0到10%以及90%到100%之間的精度.如歐洲標的精度為1%,則在中國標的精度就為0.5%。
The accuracy is determined by nonlinearity, hysteresis, non repeatability, temperature, zero offset scale, and temperature effect. But mainly by the pressure transmitter nonlinear, hysteresis, non repeatability, the higher the accuracy, the higher the price. Each kind of electronic geometer will have accuracy error, but because the accuracy level of each country is different, for example, the accuracy of national standards such as China and the United States is the best part of the sensor's linearity, that is, the accuracy between 10% and 90% of the measurement range as we usually call it; while the accuracy of European standard is the worst part of linearity, In other words, we usually say that the accuracy of the measurement reverse is between 0% and 10% and 90% to 100%. If the accuracy of European standard is 1%, the accuracy of Chinese standard is 0.5%.
產品在石化行業可廣泛應用于石油、煉油、調油、油水介面檢測；在食品工業用于葡萄汁、番茄汁、果糖漿、植物油及軟飲料加工等生產現場；奶制品業；造紙業；黑漿、綠漿、白漿、堿溶液的測量；釀酒酒精度；化工類的尿素、清潔劑、乙二醇、酸堿及聚合物密度的測量。還可應用于采礦鹽水、鉀堿、天然氣、潤滑油、生物制藥等行業。
The products can be widely used in the petrochemical industry for the detection of oil, oil refining, oil blending and oil-water interface detection; in the food industry, it is used for the processing of grape juice, tomato juice, fructose syrup, vegetable oil and soft drinks; the dairy industry; the paper industry; the measurement of black pulp, green pulp, white pulp and alkali solution; the accuracy of wine making; the chemical urea, detergent, ethylene glycol, acid-base and polymer density Degree measurement. It can also be used in mining brine, potash, natural gas, lubricating oil, biopharmaceutical and other industries.
測量范圍：0.000–3.000g/cm3(0000–3000kg/m3)（用戶可隨意選用測量范圍）
Measurement range: 0.000 – 3.000g/cm3 (0000 – 3000kg / m3) (users can choose the measurement range at will)
標定范圍：0.500–3.000g/cm3(500–3000kg/m3)（根據用戶選用測量范圍來標定）
Calibration range: 0.500 – 3.000g/cm3 (500 – 3000kg / m3) (calibrated according to the measurement range selected by users)
測量精度：±0.01g/cm3、±0.005g/cm3、±0.002g/cm3（用戶自行選擇適用精度）
Measurement accuracy: ± 0.01g/cm3, ± 0.005g/cm3, ± 0.002g/cm3 (user's choice of applicable accuracy)
重復性：±0.0005g/cm3(±0.5kg/m3)
Repeatability: ± 0.0005g/cm3 (± 0.5kg/m3)
操作溫度范圍：-50℃~+250℃（不同介質溫度可選，分為低溫、常溫、高溫型）
Operating temperature range: - 50 ℃ ~ + 250 ℃ (different medium temperatures can be selected, including low temperature, normal temperature and high temperature)
最大工作壓力：7.0MPa
Maximum working pressure: 7.0Mpa
流體粘度范圍：0–20000cP
Fluid viscosity range: 0 – 20000 CP
溫度系數：小于0.1kg/m3/℃(校正后)
Temperature coefficient: less than 0.1kg/m3 / ℃ (after correction)
壓力影響：可忽略不計
Pressure effect: negligible
內置溫度傳感器：PT1000
Built in temperature sensor: PT1000
接液材質：316L、哈氏合金C-276、鉭、鈦、聚四氟乙烯（特富?。?br />
Contact material: 316L, Hastelloy C-276, tantalum, titanium, polytetrafluoroethylene (Teflon)
用上述的常規方法對智能變送器進行校準是不行的，因?yàn)檫@是由HART變送器結構原理所決定了。因?yàn)橹悄茏兯推髟谳斎雺毫υ春彤a(chǎn)生的4-20mA電流信號之間，除機械、電路外，還有微處理芯片對輸入數據的運算工作。因此調校與常規方法有所區別。
It is impossible to calibrate the smart transmitter with the above conventional method, because it is determined by the structure and principle of Hart transmitter. Because the intelligent transmitter between the input pressure source and the generated 4-20mA current signal, in addition to mechanical and electrical circuits, there is also a microprocessor chip for input data operation. Therefore, the adjustment is different from the conventional method.
實際上廠家對智能變送器的校準也是有說明的，如3151/3051豎管道式差壓密度計的變送器，對校準就有:“設定量程"、“重定量程"、“微調"之分。其中“設定量程"操作主要是通過LRV.URV的數字設定來完成配置工作，而“重定量程"操作則要求將變送器連接到標準壓力源上，通過一系列指令引導，由變送器直接感應實際壓力并對數值進行設置。而量程的初始、最終設置直接取決于真實的壓力輸入值。但要看到盡管變送器的模擬輸出與所用的輸入值關系正確，但過程值的數字讀數顯示的數值會略有不同，這可通過微調項來進行校準。由于各部分既要單獨調校又必需要聯調，因此實際校準時可按以下步驟進行:
In fact, the manufacturer also has instructions for the calibration of intelligent transmitter. For example, for the transmitter of 3151 / 3051 vertical pipeline differential pressure densimeter, there are "set range", "reset range" and "fine adjustment". The "set range" operation is mainly through the LRV.URV The "pressure source" is directly connected to the "pressure source" to set the working pressure. However, the initial and final setting of the range directly depends on the actual pressure input value. However, it should be noted that although the relationship between the analog output of the transmitter and the input value used is correct, the value displayed by the digital reading of the process value will be slightly different, which can be calibrated by adjusting the term. Since each part needs to be adjusted separately and jointly, the actual calibration can be carried out according to the following steps:
1．先做一次4-20mA微調，用以校正變送器內部的D/A轉換器，由于其不涉及傳感部件，無需外部壓力信號源。
1. Make a 4-20mA fine adjustment to calibrate the D / a converter inside the transmitter. Since it does not involve sensing components, there is no need for external pressure signal source.
2．再做一次全程微調，使4-20mA、數字讀數與實際施加的壓力信號相吻合，因此需要壓力信號源。
2. Make another fine adjustment in the whole process to make the 4-20mA digital reading consistent with the actual pressure signal, so the pressure signal source is needed.
3．最后做重定量程，通過調整使模擬輸出4-20mA與外加的壓力信號源相吻合，其作用與變送器外殼上的調零(Z)、調量程(R)開關的作用完全相同。
3. Finally, rerange and adjust the analog output 4-20mA to match the external pressure signal source. Its function is exactly the same as the zero (z) and range (R) switches on the transmitter shell.
華恒西安變送器廠家采用多元化的經營思想，在生產經營工業自動化儀表及裝置的同時，也在儀表控制系統集成，儀表及設備成套，安裝調試及維修服務，技術培訓及咨詢等方面有突出的業績。代表項目有在彩虹集團玻璃燒結動能控制系統，漢江藥業鍋爐技術改造等。
Huaheng Xi'an transmitter manufacturer adopts diversified business ideas. While producing and operating industrial automation instruments and devices, it also has outstanding achievements in instrument control system integration, complete set of instruments and equipment, installation, commissioning and maintenance services, technical training and consulting. The representative projects include the kinetic energy control system of glass sintering in rainbow group and the technical transformation of boilers in Hanjiang pharmaceutical industry.
華恒西安變送器廠家憑借專業技術優勢，可靠穩定的產品質量，堅持最大限度的滿足用戶的需求是企業發展的動力源泉，以?xún)?yōu)質專業的服務為我國電力、石油、化工、冶金、水泥、礦業、市政、造紙等行業提供了高性能價格比的工業自動化儀表產品。為我國自動化儀表的發展做出了重要
Huaheng Xi'an transmitter manufacturers rely on professional and technical advantages, reliable and stable product quality, adhere to the maximum meet the needs of users is the power source of enterprise development, with high-quality professional services for China's electric power, petroleum, chemical, metallurgy, cement, mining, municipal, papermaking and other industries to provide high performance price ratio of industrial automation instrument products. It is important for the development of automation instrument in China
陜ICP備09007751號-1